CGA5L2X8R1E105KTXXXX Datasheet, PDF (29/36 Pages) TDK Electronics – Automotive Grade Capacitors

General
Specifications
CGA Series – Automotive Grade Capacitors
No. Item
Performance
Test or Inspection Method
8
Temperature
Capacitance Change (%)
Characteristics
of Capacitance
No Voltage Applied
(Class 2)
X7R: ± 15%
X8R: ± 15%
Capacitance shall be measured by the steps shown in
the following table after thermal equilibrium is obtained
for each step.
∆C be calculated ref. STEP 3 reading
Step
1
2
3
4
Temperature (ºC)
Reference temp. ± 2
Min. operating temp. ± 3
Reference temp. ± 2
Max. operating temp. ± 2
Measuring voltage: 0.1, 0.2, 0.5, 1.0V_rms.
9
Robustness of No sign of termination coming off,
Reflow solder the capacitor on P.C. board (shown in
Terminations
breakage of ceramic, or other abnormal Appendix 1a or Appendix 1b) and apply a pushing
signs.
force of 2N (CGA2) or 17.7N (CGA3, CGA4, CGA5,
CGA6) with 10±1s.
10
Bending
11
Solderability
Pushing force
Capacitor
P.C. board
No mechanical damage.
Reflow solder the capacitors on P.C. board (shown in
Appendix 2a or Appendix 2b) and bend it for 1mm.
20
50
F
New solder to cover over 75% of
termination.
25% may have pinholes or rough spots
but not concentrated in one spot.
Ceramic surface of A sections shall not
be exposed due to melting or shifting of
termination material.
R230
45
45
1
Unit: mm
Completely soak both terminations in solder at
235±5ºC for 2±0.5s.
Solder: H63A (JIS Z 3282)
Flux: Isopropyl alcohol (JIS K 8839)
Rosin (JIS K 5902) 25% solid solution.
TDK MLCC US Catalog
A section
Page 317
Version B11