CGA5L2X8R1E105KTXXXX Datasheet, PDF (28/36 Pages) TDK Electronics – Automotive Grade Capacitors

General
Specifications
CGA Series – Automotive Grade Capacitors
No. Item
1
External
Appearance
2
Insulation
Resistance
3
Voltage Proof
4
Capacitance
Performance
No defects which may affect
performance.
10,000MΩ or 500MΩ•μF min.
(As for the capacitors of rated voltage
16V DC and the item below, 10,000 MΩ
or 100MΩ•μF min.), whichever is
smaller.
Withstand test voltage without
insulation breakdown or other
damage.
Within the specified tolerance.
Test or Inspection Method
Inspect with magnifying glass (3×).
Apply rated voltage for 60s. As for the rated voltage
630V DC, apply 500V DC.
Class
Class 1
Class 2
Rated Voltage
100V and under
Over 100V
100V and under
Over 100V
Apply voltage
3 ×rated voltage
1.5 ×rated voltage
2.5 ×rated voltage
1.5 ×rated voltage
Above DC voltage shall be applied for 1 to 5s. Charge /
discharge current shall not exceed 50mA.
Class
Class 1
Class 2
Rated
Capacitance
≤ 1000pF
> 1000pF
≤ 10uF
> 10uF
Measuring
Frequency
1MHz±10%
1kHz±10%
1kHz±10%
120Hz±20%
Measuring
voltage
0.5 - 5 V_rms
1.0±0.2 V_rms
0.5±0.2 V_rms
5
Q
(Class 1)
6
Dissipation
Factor
(Class 2)
Rated Capacitance Q
C ≥ 30pF
1,000 min.
C < 30pF
400+20×C min.
C : Rated capacitance (pF)
T.C.
X8R
X7R
C0G
D.F.
0.03 max.
0.05 max.
0.075 max.
0.1 max.
See No.4 in this table for measuring condition.
See No.4 in this table for measuring condition.
7
Temperature
Characteristics
T.C.
Temperature Coefficient
of Capacitance
C0G
0 ± 30 ppm/ºC
(Class1)
Capacitance drift within ± 0.2% or
± 0.05pF, whichever larger.
TDK MLCC US Catalog
Page 316
Version B11