STE2007_06 Datasheet, PDF (60/62 Pages) STMicroelectronics – 96 x 68 Single-chip LCD controller/driver

Chip mechanical drawing
10 Chip mechanical drawing
Table 54. Mechanical dimensions
Parameter
Wafer Thickness
Die Size (X x Y)
Bumps Size on Columns and Segments Side
Pad Size on Columns and Segments Side
Bumps Pitch on Columns and Segments Side
Bumps Size on Interfaces Side
Pad Size on Interfaces Side
Bumps Pitch on Interfaces Side
Spacing between Bumps
Table 55. Alignment marks coordinates
MARKS
X
Mark1
-2834.55
Mark2
Mark3
2834.55
-2834.55
Mark4
2834.55
Mark5
2205.0
Figure 40. Alignment marks dimensions
STE2007
Dimensions
500µm
5.92 mm x 1.29 mm
28µm X 89 µm X 15
35µm X 96µm
45µm
55µm X 73µm X 15
64 µm X 82 µm
72µm
17µm
Y
517.05
517.05
-517.05
-517.05
517.05
85 µm
35 µm
60/62