STM8L052C6T6 Datasheet, PDF (59/102 Pages) STMicroelectronics – Value Line, 8-bit ultralow power MCU, 32-KB Flash, 256-byte data EEPROM, RTC, LCD, timers, USART, I2C, SPI, ADC

STM8L052C6
Electrical parameters
4. Oscillator bypassed (HSEBYP = 1 in CLK_ECKCR). When configured for external crystal, the HSE
consumption
(I_{DD HSE}) must be added. Refer to Table 28.
5. Tested in production.
6. The run from Flash consumption can be approximated with the linear formula:
I_DD(run_from_Flash) = Freq * 195 µA/MHz + 440 µA
7. Oscillator bypassed (LSEBYP = 1 in CLK_ECKCR). When configured for extenal crystal, the LSE
consumption
(I_{DD LSE}) must be added. Refer to Table 29.
Figure 8. Typ. I_DD(RUN) vs. V_DD, f_CPU = 16 MHz
3.00
2.75
2.50
-40°C
25°C
85°C
2.25
2.00
1.75
1.50
1.8
2.1
2.6
3.1
V_DD [V]
1. Typical current consumption measured with code executed from RAM
3.6
ai18213V2
Doc ID 023331 Rev 1
59/102