RHF1401_12 Datasheet, PDF (40/42 Pages) STMicroelectronics – Rad-hard 14-bit 30 Msps A/D converter

Revision history
7
Revision history
RHF1401
Table 17. Document revision history
Date
Revision
Changes
29-Jun-2007
First public release.
Failure immune and latchup immune value increased to
120 MeV-cm2/mg.
1
Updated package mechanical information.
Removed reference to non rad-hard components from External
references, common mode: on page 16.
29-Oct-2007
Updated Figure 1: RHF1401 block diagram.
Added explanation on Figure 3: Timing diagram.
Added introduction to Section 6: Typical performance characteristics.
Updated Section 7.2: Clock signal requirements and Section 7.3:
2
Power consumption optimization.
Added Section 7.4: Low sampling rate recommendations.
Updated information on Data Ready signal in Section 7.5: Digital
inputs/outputs.
Added Figure 24: Impact of clock frequency on RHF1401
performance and Figure 25: CLK signal derivation.
09-Nov-2009
Changed input clock features in Table 10.
3
Modified Table 14.
Added Figure 62 to Figure 42.
26-Feb-2010
Modified Figure 1: RHF1401 block diagram.
Added details for Tdr and changed values for Tpd in Table 5: Timing
characteristics.
Modified Figure 11: Timing diagram.
4
Changed values for VREFP in Table 4.
Changed Vin operating conditions in Table 4, Figure 42 and
Figure 55.
Changed values for DNL in Table 9.
13-Sep-2010
Modified Figure 1 on page 7 and Figure 9 on page 11.
Added note 2. on page 13.
Modified C_IN typ value in Table 6: Analog inputs as per Figure 3.
5
Modified Figure 11: Timing diagram.
Replaced Figure 18.
Added Table 12: Output codes for DFSB = 1.
Modified Figure 53: 2 Vpp differential input.
29-Jul-2011
Added Note: on page 31 and in the "Pin connections" diagram on the
6
cover page.
40/42
Doc ID 13317 Rev 8