LSM303DLH Datasheet, PDF (36/47 Pages) STMicroelectronics – Sensor module: 3-axis accelerometer and 3-axis magnetometer

Registers description
LSM303DLH
9.1.13 INT1_SRC_A (31h)
Table 41. INT1_SRC register
0
IA
ZH
ZL
YH
YL
XH
XL
Table 42. INT1_SRC_A description
Interrupt active. Default value: 0
IA
(0: no interrupt has been generated; 1: one or more interrupts have been generated)
Z high. Default value: 0
ZH
(0: no interrupt, 1: Z high event has occurred)
Z low. Default value: 0
ZL
(0: no interrupt; 1: Z low event has occurred)
Y high. Default value: 0
YH
(0: no interrupt, 1: Y high event has occurred)
Y low. Default value: 0
YL
(0: no interrupt, 1: Y low event has occurred)
X high. Default value: 0
XH
(0: no interrupt, 1: X high event has occurred)
X low. Default value: 0
XL
(0: no interrupt, 1: X low event has occurred)
9.1.14
Interrupt 1 source register. Read-only register.
Reading at this address clears INT1_SRC_A IA bit (and the interrupt signal on INT 1 pin)
and allows the refreshing of data in the INT1_SRC_A register if the latched option was
chosen.
INT1_THS_A (32h)
Table 43. INT1_THS register
0
THS6
THS5
THS4
THS3
THS2
THS1
THS0
Table 44. INT1_THS description
THS6 - THS0 Interrupt 1 threshold. Default value: 000 0000
9.1.15 INT1_DURATION_A (33h)
Table 45. INT1_DURATION_A register
0
D6
D5
D4
D3
D2
D1
D0
36/47
Table 46. INT2_DURATION_A description
D6 - D0
Duration value. Default value: 000 0000
Doc ID 16941 Rev 1