AIS328DQ Datasheet, PDF (35/43 Pages) STMicroelectronics – High-performance ultra low-power 3-axis accelerometer

AIS328DQ
Register description
Configuration register for interrupt 2 source.
Table 48. Interrupt mode configuration
AOI
6D
0
0
0
1
1
0
1
1
Interrupt mode
OR combination of interrupt events
6-direction movement recognition
AND combination of interrupt events
6-direction position recognition
7.18
INT2_SRC (35h)
Table 49. INT2_SRC register
0
IA
ZH
ZL
YH
YL
XH
XL
Table 50. INT2_SRC description
Interrupt active. Default value: 0
IA
(0: no interrupt has been generated; 1: one or more interrupts have been generated)
Z high. Default value: 0
ZH
(0: no interrupt, 1: Z high event has occurred)
Z low. Default value: 0
ZL
(0: no interrupt; 1: Z low event has occurred)
Y high. Default value: 0
YH
(0: no interrupt, 1: Y high event has occurred)
Y low. Default value: 0
YL
(0: no interrupt, 1: Y low event has occurred)
X high. Default value: 0
XH
(0: no interrupt, 1: X high event has occurred)
X Low. Default value: 0
XL
(0: no interrupt, 1: X low event has occurred)
Interrupt 2 source register. Read only register.
Reading at this address clears the INT2_SRC IA bit (and the interrupt signal on the INT 2
pin) and allows the refreshing of data in the INT2_SRC register if the latched option was
chosen.
7.19
INT2_THS (36h)
Table 51. INT2_THS register
0
THS6
THS5
THS4
THS3
THS2
THS1
THS0
Doc ID 18160 Rev 3
35/43