AIS328DQ Datasheet, PDF (34/43 Pages) STMicroelectronics – High-performance ultra low-power 3-axis accelerometer

Register description
Table 43. INT1_THS description
THS6 - THS0 Interrupt 1 threshold. Default value: 000 0000
AIS328DQ
7.16
INT1_DURATION (33h)
Table 44. INT1_DURATION register
0
D6
D5
D4
D3
D2
D1
D0
Table 45. INT2_DURATION description
D6 - D0
Duration value. Default value: 000 0000
The D6 - D0 bits set the minimum duration of the interrupt 2 event to be recognized.
Duration steps and maximum values depend on the ODR chosen.
7.17
INT2_CFG (34h)
Table 46. INT2_CFG register
AOI
6D
ZHIE
ZLIE
YHIE
YLIE
XHIE
XLIE
Table 47.
AOI
6D
ZHIE
ZLIE
YHIE
YLIE
XHIE
XLIE
INT2_CFG description
AND/OR combination of interrupt events. Default value: 0.
(see Table 48)
6-direction detection function enable. Default value: 0.
(see Table 48)
Enable interrupt generation on Z high event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on Z low event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value lower than preset threshold)
Enable interrupt generation on Y high event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on Y low event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value lower than preset threshold)
Enable interrupt generation on X high event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on X low event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value lower than preset threshold)
34/43
Doc ID 18160 Rev 3