LSM303DLHC Datasheet, PDF(31/43 Page) STMicroelectronics – Ultra compact high performance e-compass 3D accelerometer and 3D magnetometer module

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

LSM303DLHC Datasheet, PDF (31/43 Pages) STMicroelectronics – Ultra compact high performance e-compass 3D accelerometer and 3D magnetometer module

◁

LSM303DLHC

Table 44. INT1_SRC_A description (continued)

Y low. Default value: 0

(0: no interrupt, 1: Y low event has occurred)

X high. Default value: 0

(0: no interrupt, 1: X high event has occurred)

X low. Default value: 0

(0: no interrupt, 1: X low event has occurred)

7.1.16

Interrupt 1 source register. Read only register.

Reading at this address clears the INT1_SRC IA bit (and the interrupt signal on the INT 1

pin) and allows the refreshing of data in the INT1_SRC register if the latched option was

chosen.

INT1_THS_A (32h)

Table 45. INT1_THS_A register

0(1)

THS6

THS5

THS4

THS3

1. This bit must be set to â0â for correct working of the device.

THS2

THS1

THS0

Table 46. INT1_THS_A description

THS6 - THS0 Interrupt 1 threshold. Default value: 000 0000

7.1.17 INT1_DURATION_A (33h)

Table 47. INT1_DURATION_A register

0(1)

1. This bit must be set to â0â for correct working of the device.

Table 48. INT1_DURATION_A description

D6 - D0

Duration value. Default value: 000 0000

7.1.18

D6 - D0 bits set the minimum duration of the Interrupt 1 event to be recognized. Duration

steps and maximum values depend on the ODR chosen.

INT2_CFG_A (34h)

Table 49. INT2_CFG_A register

AOI

ZHIE

ZLIE

YHIE

YLIE

XHIE

XLIE

Doc ID 018771 Rev 1

31/42

▷