RM0366 Datasheet, PDF(261/868 Page) STMicroelectronics – This reference manual targets application developers

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

RM0366 Datasheet, PDF (261/868 Pages) STMicroelectronics – This reference manual targets application developers

◁

Analog-to-digital converters (ADC)

RM0366

12.5.15

ADC injected sequence register (ADCx_JSQR, x=1)

Address offset: 0x4C

Reset value: 0x0000 0000

31

30

29

28

27

26

25

24

Res.

JSQ4[4:0]

Res.

rw

rw

rw

rw

rw

rw

15

14

13

12

11

10

9

8

JSQ2[1:0]

Res.

JSQ1[4:0]

rw

rw

rw

rw

rw

rw

rw

23

22

21

JSQ3[4:0]

rw

rw

rw

7

6

5

JEXTEN[1:0]

rw

rw

20

19

Res.

rw

4

3

JEXTSEL[3:0]

rw

rw

18

17

16

JSQ2[4:2]

rw

rw

rw

2

1

0

JL[1:0]

rw

rw

rw

Bit 31 Reserved, must be kept at reset value.

Bits 30:26 JSQ4[4:0]: 4th conversion in the injected sequence

These bits are written by software with the channel number (1..18) assigned as the 4th in the

injected conversion sequence.

Note: Software is allowed to write these bits at any time, once the ADC is enabled (ADEN=1).

Note: Analog input channel 0 is not mapped: value â00000â should not be used

Bit 25 Reserved, must be kept at reset value.

Bits 24:20 JSQ3[4:0]: 3rd conversion in the injected sequence

These bits are written by software with the channel number (1..18) assigned as the 3rd in the

injected conversion sequence.

Note: Software is allowed to write these bits at any time, once the ADC is enabled (ADEN=1).

Note: Analog input channel 0 is not mapped: value â00000â should not be used

Bits 19 Reserved, must be kept at reset value.

Bits 18:14 JSQ2[4:0]: 2nd conversion in the injected sequence

These bits are written by software with the channel number (1..18) assigned as the 2nd in the

injected conversion sequence.

Note: Software is allowed to write these bits at any time, once the ADC is enabled (ADEN=1).

Note: Analog input channel 0 is not mapped: value â00000â should not be used

Bits 13 Reserved, must be kept at reset value.

Bits 12:8 JSQ1[4:0]: 1st conversion in the injected sequence

These bits are written by software with the channel number (1..18) assigned as the 1st in the

injected conversion sequence.

Note: Software is allowed to write these bits at any time, once the ADC is enabled (ADEN=1).

Note: Analog input channel 0 is not mapped: value â00000â should not be used

261/868

DocID025203 Rev 2

▷