|
STM32F205VCT6TR Datasheet, PDF (163/178 Pages) STMicroelectronics – ARM-based 32-bit MCU, 150DMIPs, up to 1 MB Flash/128+4KB RAM | |||
|
◁ |
STM32F20xxx
Package characteristics
7.2
Thermal characteristics
The maximum chip-junction temperature, TJ max, in degrees Celsius, may be calculated
using the following equation:
TJ max = TA max + (PD max x ÎJA)
Where:
⢠TA max is the maximum ambient temperature in °C,
⢠ÎJA is the package junction-to-ambient thermal resistance, in °C/W,
⢠PD max is the sum of PINT max and PI/O max (PD max = PINT max + PI/Omax),
⢠PINT max is the product of IDD and VDD, expressed in Watts. This is the maximum chip
internal power.
PI/O max represents the maximum power dissipation on output pins where:
PI/O max = Σ (VOL à IOL) + Σ((VDD â VOH) à IOH),
taking into account the actual VOL / IOL and VOH / IOH of the I/Os at low and high level in the
application.
Table 93. Package thermal characteristics
Symbol
Parameter
Value
Thermal resistance junction-ambient
LQFP 64 - 10 Ã 10 mm / 0.5 mm pitch
45
Thermal resistance junction-ambient
WLCSP64+2 - 0.400 mm pitch
51
Thermal resistance junction-ambient
LQFP100 - 14 Ã 14 mm / 0.5 mm pitch
46
ÎJA
Thermal resistance junction-ambient
LQFP144 - 20 Ã 20 mm / 0.5 mm pitch
40
Thermal resistance junction-ambient
LQFP176 - 24 Ã 24 mm / 0.5 mm pitch
38
Thermal resistance junction-ambient
UFBGA176 - 10Ã 10 mm / 0.5 mm pitch
39
Unit
°C/W
Reference document
JESD51-2 Integrated Circuits Thermal Test Method Environment Conditions - Natural
Convection (Still Air). Available from www.jedec.org.
DocID15818 Rev 11
163/178
177
|
▷ |