LPS25H Datasheet, PDF (10/45 Pages) STMicroelectronics – Embedded temperature compensation

Mechanical and electrical specifications
Figure 4. I²C slave timing diagram
SDA
START
LPS25H
REPEATED
START
t_su(SR)
tw(SP:SR)
START
t_f(SDA)
SCL
t_r(SDA)
t_su(SDA)
th(SDA)
t_su(SP)
STOP
Note:
th(ST) tw(SCLL)
tw(SCLH)
tr(SCL)
tf(SCL)
Measurement points are done at 0.2·Vdd_IO and 0.8·Vdd_IO, for both port.
2.4
Note:
Absolute maximum ratings
Stress above those listed as “Absolute maximum ratings” may cause permanent damage to
the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 7. Absolute maximum ratings
Symbol
Ratings
Maximum value
VDD Supply voltage
-0.3 to 4.8
VDD_IO I/O pins supply voltage
-0.3 to 4.8
Vin Input voltage on any control pin
-0.3 to Vdd_IO +0.3
P Overpressure
2
T_STG
ESD
Storage temperature range
Electrostatic discharge protection
-40 to +125
2 (HBM)
Unit
V
V
V
MPa
°C
kV
Supply voltage on any pin should never exceed 4.8 V.
This is a mechanical shock sensitive device, improper handling can cause permanent
damage to the part.
This is an ESD sensitive device, improper handling can cause permanent damage to
the part.
10/45
DocID023722 Rev 5