HDN1102W-TR Datasheet, PDF (18/22 Pages) STANLEY ELECTRIC CO.,LTD. – 3.0 x 1.5 size, with Inner Lens Infrared emitting diode

Taping and Reel Specifications
HDN1102W-TR
(acc.to ; JIS-C0806-03）
2. Qty. per Reel
2,500parts/reel
Minimum Qty. per reel might be 500 parts when getting less than 2,500 parts. In such case,
parts of 500-unit-qty. shall be packed in a reel and the qty. shall be identified on the label.
3. Mechanical strength
Cover-tape adhesive strength shall be 0.1～1.0N
( An angle between carrier-tape and cover-tape shall be165～180 deg. )
Both tapes shall be so sealed that the contained parts will not come out
from the tape when it is bent at a radius of 25mm.
4. Others
Reversed-orientation, Up-side down placing, side placing and out of spec. parts mix shall not be held. Max
qty. of empty pocket per reel shall be defined as follows.
Qty./Reel
500
1,000
1,500
2,000
2,500
Max.Qty. of empty pocket
1
1
1
2
2
Remarks
-
-
-
No continuance
No continuance
2014.10.28
Page : 18