HDN1102W-TR Datasheet, PDF (17/22 Pages) STANLEY ELECTRIC CO.,LTD. – 3.0 x 1.5 size, with Inner Lens Infrared emitting diode

Taping and Reel Specifications
(acc.to ; JIS-C0806-03）
1. Appearance
HDN1102W-TR
Note
"-TR" means cathode side of LEDs should be placed on the sprocket-hole side.
ITEMS
Leader area
Cover-tape
Carrier-tape
Trailer area
SPECIFICATIONS
Cover-tape shall be longer
than 200mm without carrier-tape
Empty pocket shall be more than
10 pieces.
Empty pocket shall be more than
15 pieces.
REMARKS
The end of cover-tape shall be
held with adhesive tape.
Please refer to the above figure
for Taping & reel orientation .
The end of taping shall be
inserted into a slit of the hub.
2014.10.28
Page : 17