LCD-14048 Datasheet, PDF (25/33 Pages) SparkFun Electronics – TeensyView Hookup Guide

Page 25 of 33
The TeensyView atop a Teensy Prop stack. Notice the attached LED and
speaker.
Hardware Requirements
• Teensy 3.1 to 3.6
• TeensyView set to the following:
◦ RST set to default
◦ DC set to alternate
◦ CS set to alternate
◦ CLK set to default
◦ mosi set to default
• Prop Shield with:
◦ (optional) 1 AP102 attached to LED port – 1m APA102 Strip or
5m APA102 Strip shown
◦ (optional) Speaker attached to speaker port – Audio Jack and
Audio Jack Breakout shown
Choose the example TeensyViewProp from the menu, compile and run.
After the splash screen, the sketch will start, and the display will switch to
orientation information. (Note: With so many included libraries, this can take
awhile to compile!)
Alternately, copy the code from here: