LCD-14048 Datasheet, PDF (15/33 Pages) SparkFun Electronics – TeensyView Hookup Guide

/*************************************************************
*****************
TeensyView_Demo.ino
SFE_TeensyView Library Demo
Jim Lindblom @ SparkFun Electronics
Original Creation Date: October 27, 2014
Modified Febuary 2, 2017
This sketch uses the TeensyView library to draw a 3­D proje
cted
cube, and rotate it along all three axes.
Development environment specifics:
Arduino IDE 1.6.12 w/ Teensyduino 1.31
Arduino IDE 1.8.1 w/ Teensyduino 1.35
TeensyView v1.0
This code is beerware; if you see me (or any other SparkFu
n employee) at the
local, and you've found our code helpful, please buy us a r
ound!
Distributed as­is; no warranty is given.
*************************************************************
*****************/
#include <TeensyView.h> // Include the SFE_TeensyView library
///////////////////////////////////
// TeensyView Object Declaration //
///////////////////////////////////
//Standard
#define PIN_RESET 15
#define PIN_DC 5
#define PIN_CS 10
#define PIN_SCK 13
#define PIN_MOSI 11
//Alternate (Audio)
//#define PIN_RESET 2
//#define PIN_DC 21
//#define PIN_CS 20
//#define PIN_SCK 14
//#define PIN_MOSI 7
TeensyView oled(PIN_RESET, PIN_DC, PIN_CS, PIN_SCK, PIN_MOSI);
void setup()
{
oled.begin(); // Initialize the OLED
oled.clear(ALL); // Clear the display's internal memory
oled.display(); // Display what's in the buffer (splashscre
en)
delay(1000);
// Delay 1000 ms
oled.clear(PAGE); // Clear the buffer.
randomSeed(analogRead(A0) + analogRead(A1));
}
void pixelExample()
{
printTitle("Pixels", 1);
for (int i = 0; i < 1024; i++)
Page 15 of 33