LCD-14048 Datasheet, PDF (1/33 Pages) SparkFun Electronics – TeensyView Hookup Guide



TeensyView Hookup Guide
Introduction
The TeensyView is an SSD1306 128x32 OLED screen breakout that
matches the Teensy 3 form factor. It’s great for displaying debug
information and visualizing data on a Teensy, and it is compatible with the
LC, 3.1, 3.2, 3.5, 3.6, Audio Board, Prop Shield, Prop Shield LC and XBee
Adapter.
This guide shows how to connect the TeensyView to various Teensy-
related products, then shows some examples with a library reference. The
SSD1306 driver is quite popular and has a lot of support behind it. The
TeensyView Arduino Library is like the Micro OLED Breakout’s and the
MicroView’s libraries, so expect the same functions to work, just tuned for
the Teensy and conveniently packaged.
Required Materials
To get started, you’ll need the following things:
• A Teensy LC / 3.1 or higher
• A TeensyView
• A soldering iron and soldering tools
• A pair of scissors
• Your option of connecting headers
◦ Normal Female Headers
◦ Stackable headers, such as the Teensy Header Kit
◦ Break Away Headers — Straight
◦ Long Break Away Headers
• An add-on board such as the Audio Board or Prop Shield can be
handy to run the examples with
This guide uses a Teensy 3.2, Straight Break Away Headers and a Teensy
Header Kit.
Page 1 of 33