SKY66100_11 Datasheet, PDF (9/16 Pages) Skyworks Solutions Inc. – 169 to 170 MHz Transmit-Receive Front-End Module

DATA SHEET • SKY66100-11: TRANSMIT/RECEIVE FEM
Evaluation Board Description
The SKY66100-11 Evaluation Board is used to test the
performance of the SKY66100-11 FEM. Evaluation Board
schematic diagrams are provided in Figure 12 (EK-1 board, +24
dBm) and in Figure 13 (EK-2 board, +27 dBm). An assembly
drawing for the Evaluation Board is shown in Figure 14.
Package Dimensions
The typical part marking for the SKY66100-11 is shown in
Figure 15. The PCB layout footprint for the SKY66100-11 is
provided in Figure 16. Figure 17 shows the package dimensions
for the 16-pin MCM, and Figure 18 provides the tape and reel
dimensions.
Package and Handling Information
Since the device package is sensitive to moisture absorption, it is
baked and vacuum packed before shipping. Instructions on the
shipping container label regarding exposure to moisture after the
container seal is broken must be followed. Otherwise, problems
related to moisture absorption may occur when the part is
subjected to high temperature during solder assembly.
The SKY66100-11 is rated to Moisture Sensitivity Level 3 (MSL3)
at 260 C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
PCB Design and SMT Assembly/Rework Guidelines for MCM-L
Packages, document number 101752.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
201829E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 1, 2015
9