English
Language : 

SKY66100_11 Datasheet, PDF (3/16 Pages) Skyworks Solutions Inc. – 169 to 170 MHz Transmit-Receive Front-End Module
DATA SHEET • SKY66100-11: TRANSMIT/RECEIVE FEM
Table 2. SKY66100-11 Absolute Maximum Ratings (Note 1)
Parameter
Symbol
Minimum
Maximum
Units
Supply voltage (Pins: VCC0, VCC1, VCC2)
VCC
–0.3
+3.8
V
Digital input voltage (Pins: CSD_L, CTX, CBYP_L)
VCTL
–0.5
VCC
V
Receive mode (Pin: ANT)
PIN_ANT
+15
dBm
Transmit mode (Pin: TX)
PIN_TX
–4
dBm
Transmit RF input power, transmit bypass mode (Pin:TX)
PIN_TXB
+20
dBm
Transmit output power
POUT
+28
dBm
Voltage Standing Wave Ratio
VSWR
10:1
–
Thermal resistance
ΘJC
14.7
C/W
Operating temperature
TC
–40
+85
C
Storage temperature
TSTG
–55
+150
C
Junction temperature
TJ
+150
C
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. SKY66100-11 Recommended Operating Conditions
Parameter
Symbol
Operating frequency range
f
Supply voltage (Pins: VCC0, VCC1, VCC2)
VCC
Receive RF input power (Pin: RX)
PIN_RX
Transmit RF input power, transmit mode (Pin:TX)
PIN_TX
Transmit RF input power, transmit bypass mode (Pin: TX) PIN_TX
Transmit mode duty cycle
Minimum
169
2.0
Typical
3.3
–6
+15
Maximum
170
3.6
–15
+20
50
Units
MHz
V
dBm
dBm
dBm
%
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201829E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 1, 2015
3