|
SKY85806-11 Datasheet, PDF (1/17 Pages) Skyworks Solutions Inc. – Dual-Band 802.11a-g-n-ac Wireless LAN | |||
|
DATA SHEET
SKY85806-11: Dual-Band 802.11a/g/n/ac Wireless LAN
Front End
Applications
ï· WLANs:
ï IEEE 802.11b DSSS
ï IEEE 802.11a/g OFDM
ï IEEE 802.11ac/n
ï· Access points
ï· PCMCIA cards
ï· PC cards
Features
ï· All RF ports matched to 50 Ω
ï· Integrated 2.4 GHz PA, 5 GHz PA, transmit filter, diplexers,
and T/R switches
ï· Integrated logarithmic power detector for each transmit chain
ï· +21 dBm power, 802.11b, 11 Mbps, ACPR = +35 dBc
ï· +19 dBm @ 3.0% EVM, MCS7, HT40, 2G
ï· +17 dBm @ 3.0% EVM, MCS7, HT40, 5G
ï· +17 dBm @ 1.8% EVM, MCS9, HT40, 2G
ï· +15 dBm @ 1.8% EVM, MCS9, HT80, 5G
ï· Single supply voltage: 3.3 V ± 10%
ï· Sleep mode: < 1 μA
ï· Bluetooth® ready; functional when VCC = 0 V or 3.3 V
ï· Bluetooth and 5 GHz WiFi concurrent operation
ï· Multiple receive bypass step attenuation
ï· Small QFN (28-pin, 4.0 x 3.0 x 0.8 mm) package
(MSL3, 240 °C per JEDEC J-STD-020)
Skyworks GreenTM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Deï¬nition of GreenTM, document number
SQ04â0074.
P0
P1
A0 A1/BS CBT
Bias, Switch, and Control Logic
BT
2G
TXg
PA
SP3T
2G
RXg
LNA
Diplex ANT
RXa
5G
LNA
SP2T
TXa
5G
PA
Detector
Y1661
DET
Figure 1. SKY85806-11 Block Diagram
Description
The SKY85806-11 is a complete 802.11a/b/g/n/ac Wireless
Local Area Network (WLAN), RF front-end module (FEM) that
provides all the functionality of a power amplifier (PA), filtering,
power detector, transmit/receive (T/R) switch, diplexer, and
associated matching. The SKY85806-11 provides a complete
2.4 GHz and 5 GHz WLAN RF solution, from the output of the
transceiver to the antenna in an ultra-compact form factor.
Designed to meet the stringent linearity conditions of the
802.11ac standard, the SKY85806-11 delivers less than 2%
error vector magnitude (EVM) at the rated Alternating Current
(AC) power.
Designed for ease of use, all RF ports are matched to 50 Ω to
simplify the layout of the printed circuit board (PCB) and the
interface to the transceiver. The SKY85806-11 also includes a
transmitter power detector with +20 dB of dynamic range for
each transmit chain. Each power amplifier has a separate
digital enable control for transmitter on/off control. The power
ramp rise/fall time is less than 0.5 μs.
The SKY85806-11 provides Local Oscillator (LO) filters for the
2 GHz and 5 GHz transmit paths. The SKY85806-11 is packaged
in a small 4.0 x 3.0 x 0.8 mm, Quad Flat No-Lead (QFN)
package.
A block diagram of the SKY85806-11 is shown in Figure 1. The
device package and pinout are shown in Figure 2. Signal pin
assignments and functional pin descriptions are described in
Table 1.
Skyworks Solutions, Inc. ⢠Phone [781] 376-3000 ⢠Fax [781] 376-3100 ⢠sales@skyworksinc.com ⢠www.skyworksinc.com
203186E ⢠Skyworks Proprietary Information ⢠Products and Product Information are Subject to Change Without Notice ⢠February 6, 2015
1
|
▷ |