SI5340-EVB Datasheet, PDF (9/19 Pages) Silicon Laboratories – Powered from USB port or external power supply

Si5340-EVB
4. Select Yes to write the default plan to the Si5340 device mounted on your EVB. This ensures the device is
completely reconfigured per the Silicon Labs default plan for the DUT type mounted on the EVB.
Figure 12. Writing Design Status
5. After CBPro writes the default plan to the EVB, click on Open EVB GUI as shown in Figure 13.
Figure 13. Open EVB GUI
6. The EVB GUI opens.
Note: All power supplies are set to the values defined in the device's default CBPro project file created by
Silicon Labs, as shown in Figure 14.
Figure 14. EVB GUI Window
Rev. 1.0
9