SI5340-EVB Datasheet, PDF (8/19 Pages) Silicon Laboratories – Powered from USB port or external power supply

Si5340-EVB
10.3. Common ClockBuilderPro^TM Work Flow Scenarios
There are three common workflow scenarios when using CBPro and the Si5340 EVB. These workflow scenarios
are as follows:
 Workflow Scenario #1: Testing a Silicon Labs-created default configuration
 Workflow Scenario #2: Modifying the default Silicon Labs-created device configuration
 Workflow Scenario #3: Testing a user-created device configuration
Each workflow scenario is described in more detail in the following sections.
10.3.1. Workflow Scenario #1: Testing a Silicon Labs-Created Default Configuration
The flow for using the EVB GUI to initialize and control a device on the EVB is as follows:
1. Once the PC and EVB are connected, launch ClockBuilder Pro by clicking this icon on your PC's desktop:
Figure 9. ClockBuilderPro Desktop Icon
2. If an EVB is detected, click on the Open Default Plan button on the Wizard's main menu. CBPro
automatically detects the EVB and device type.
Figure 10. Open Default Plan
3. Once you open the default plan (based on your EVB model number), a popup window appears.
Figure 11. Write Design to EVB Dialog
8
Rev. 1.0