SI5340-EVB Datasheet, PDF (12/19 Pages) Silicon Laboratories – Powered from USB port or external power supply

Si5340-EVB
Verify Locked Mode Operation
Assuming you connect the correct input clocks to the EVB (as noted in the Design Report shown above), the DUT
on your EVB will be running in "locked" mode.
10.3.2. Workflow Scenario #2: Modifying the Default Silicon Labs-Created Device Configuration
To modify the "default" configuration using the CBPro Wizard, click on Edit Configuration with Wizard.
Figure 18. Edit Configuration with Wizard
You are then taken to the Wizard's step-by-step menus which allow you to change any of the default plan's
operating configurations.
Figure 19. Design Wizard
Note: You can click on the icon on the lower left hand of the menu to confirm if your frequency plan is valid. After making your
desired changes, you can click on Write to EVB to update the DUT to reconfigure your device in real-time. The Design
Write status window opens each time you make a change.
12
Rev. 1.0