SI5340-EVB Datasheet, PDF (1/19 Pages) Silicon Laboratories – Powered from USB port or external power supply

Si5340-EVB
Si5340 EVALUATION BOARD USER’S GUIDE
Description
Features
The Si5340-EVB is used for evaluating the Si5340 Low
Jitter Any-Frequency Clock Generator. The Si5340 uses
the patented Multisynth^TM technology to generate up to
10 independent clock frequencies each with 0 ppm
synthesis error. The Si5340-EVB has 3 independent
input clocks, an optional feedback input clock for zero
delay mode, and 4 independent output clocks. The
Si5340-EVB can be controlled and configured using the
Clock Builder Pro^TM (CB Pro^TM) software tool.
 Powered from USB port or external power supply
 Onboard 48 MHz XTAL allows free-run mode of
operation on the Si5340 or up to 3 input clocks for
synchronous clocking
 Feedback clock input for optional zero delay mode
 CBPro^TM GUI-programmable VDD supply allows
device to operate from 3.3, 2.5, or 1.8 V.
 CBPro GUI-programmable VDDO supplies allow
each of the 4 outputs to have its own supply voltage
selectable from 3.3, 2.5, or 1.8 V
 CBPro GUI-controlled voltage, current, and power
measurements of VDD and all VDDO supplies.
 Status LEDs for power supplies and control/status
signals of Si5340
 SMA connectors for input and output clocks
Si5340 Evaluation Board
Rev. 1.0
Copyright © 2015 by Silicon Laboratories
Si5340-EVB