CP2102N Datasheet, PDF (1/44 Pages) Silicon Laboratories – USBXpress Family

USBXpress™ Family
CP2102N Data Sheet
The CP2102N devices, part of the USBXpress family, are de-
signed to quickly add USB to your applications by eliminating
firmware complexity and reducing development time.
These highly-integrated USB-to-UART bridge controllers provide a simple solution for
updating RS-232 designs to USB using a minimum of components and PCB space.
CP2102N includes a USB 2.0 full-speed function controller, USB transceiver, oscillator,
and Universal Asynchronous Receiver/Transmitter (UART) in packages as small as 3
mm x 3 mm. No other external USB components are required for development. All cus-
tomization and configuration options can be selected using a simple GUI-based config-
urator. By eliminating the need for complex firmware and driver development, the
CP2102N devices enable quick USB connectivity with minimal development effort.
CP2102N is ideal for a wide range of applications, including the following:
• POS terminals
• USB dongles
• Medical equipment
• Data loggers
• Gaming controllers
KEY FEATURES
• No firmware development required
• Simple GUI-based configurator
• Integrated USB transceiver; no external
resistors required
• Integrated clock; no external crystal
required
• USB 2.0 full-speed compatible
• Data transfer rates up to 3 Mbaud
• USB Battery Charger Detection (USB BCS
1.2 Specification)
• Remote wakeup for waking a suspended
host
• Low operating current : 9.5 mA
• Royalty-free Virtual COM port drivers
CP2102N
USB Connector
External battery
charging
circuitry
Remote
Wakeup
USB Battery
Charger
Detect
Voltage
Regulator
48 MHz
Oscillator
USB
Transceiver
USB Function
Controller
960 byte
Configuration
Memory
Hardware
Handshaking
512 byte
TX Buffer
512 byte
RX Buffer
UART
RS485
Feature is related to:
USB
UART
Overall System
External
circuitry for
USB suspend
states
External RS-232
transceiver or
UART circuitry
silabs.com | Smart. Connected. Energy-friendly.
Rev. 1.0