S-93C46A Datasheet, PDF (41/53 Pages) Seiko Instruments Inc – CMOS SERIAL E2PROM

In the case of a write command, if the number of clocks is smaller than the predetermined value, data is
loaded so as to be changed from D15 to D0. When, for example, CS is shifted from H to L after three
clocks, data, which would otherwise have been stored in D15 to D13, is stored in D2 to D0, while
undefined data is stored on the upper side a storage state in which the internal logic has been changed
to either H or L). In addition, if the number of clocks is greater than the predetermined value, the last 16
pieces of data are stored correctly.
<Remarks>
FAQ No.: 12008
40