S-8204AAB-TCT1Y Datasheet, PDF (25/34 Pages) Seiko Instruments Inc – BATTERY PROTECTION IC

Rev.3.5_00
BATTERY PROTECTION IC FOR 3-SERIES OR 4-SERIES CELL PACK
S-8204A Series
 Precautions
• The application conditions for the input voltage, output voltage, and load current should not exceed the
package power dissipation.
• Batteries can be connected in any order; however, there may be cases when discharging cannot be
performed when a battery is connected. In such a case, short the VMP pin and VDD pin or connect the
battery charger to return the IC to the normal mode.
• If both an overcharge battery and an overdischarge battery are included among the whole batteries, the
condition is set in overcharge status and overdischarge status. Therefore either charging or discharging is
impossible.
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in
electrostatic protection circuit.
• SII Semiconductor Corporation claims no responsibility for any disputes arising out of or in connection
with any infringement by products including this IC of patents owned by a third party.
25