ID246 Datasheet, PDF (4/38 Pages) Sharp Electrionic Components – Flash Memory Card

SHARP
ID246 SERIFS PRODUCT OVERVIEW
1. Introduction
This datasheet is for SHARP’s ID246 series flash memory card. This datasheet provides all AC and DC character-
istics (including timing waveforms) and a convenient reference for the device command set and the cards inte-
grated registers(including the Flash Memory’s status registers). This datasheet provides description of the meth-
ods which are very helpful for customer to use the card.
2. Features
2.1 Type
2.2 Overview
Flash Memory Card
Common
Memory
Capacity
Byte
Word
Device
Attribute Memory
Capasity
Supply Voltage
Access time
Erase Unit
Program/Erase
Cycles
External
Dimensions
ID246Pxx
ID246Rxx
ID246Sxx
32Mbyte
40Mbyte
48Mbyte
16Mword
20Mword
24Mword
LH28F032SKD
8devices
LH28F032SKD
lodevices
LH28F032SKD
12devices
2Kbyte
(Note:standard CIS is not writable)
vcc=sv ! vpp=sv,
vcc=3.3v I vpp=3.3v,5v
150ns(@Vcc=%)
250ns(@Vcc=3.3v)
64K word blocks
1 OO,OOOcycles/Block
PCMCIA Type 1
54.0X 85.6X 3.3mm
2.3 Interface
Parallel I/O Interface
2.4 Function Table
See Function Table in page. 9
2.5 Pin Connections
See Pin Connections in page. 5
2.6 Type of Connector
Conforms to PCMCIA PC Card Standard 95 Card Use Connector
Card connector: JC20-J68S-NB3 by JAE
or
FCN-568J068-G/O by Fujitsu
or
ICM-C68S-TS 13-5035A by JST
2.1 Operating Temperature
0 to 60°C
2.8 Storage Temperature
-20 to 65°C
2.9 Not designed for rated radiation hardened.