SKYPER42R Datasheet, PDF (6/18 Pages) Semikron International – IGBT Driver Core

SKYPER^® 42 R
3. Driver Interface
3.1. Controller Interface – Primary Side Pinning
Connectors
Connector X10, X11 (RM2,54, 10pin)
±0,25mm unless otherwise noted
PIN
X10:01
Signal
Reserved
X10:02 Reserved
Function
X10:03 PRIM_nERROR_OUT ERROR output
X10:04 PRIM_nERROR_IN ERROR input
X10:05 PRIM_PWR_GND
X10:06 PRIM_PWR_GND
GND for power supply and GND for digital signals
GND for power supply and GND for digital signals
X10:07 PRIM_TOP_IN
Switching signal input (TOP switch)
X10:08 PRIM_BOT_IN
Switching signal input (BOTTOM switch)
X10:09 PRIM_PWR_15P
X10:10 PRIM_PWR_15P
X11:01,
02, 05-08
X11:03,
04,09,10
Reserved
PRIM_PWR_GND
Drive core power supply
Drive core power supply
GND for power supply and GND for digital signals
5
2011-04-04 – Rev05
Specification
LOW = NO ERROR; open
collector output; max. 30V / 15mA
(external pull up resistor
necessary)
5V logic; LOW active;
High Max = 3,8V;
Low Min = 1,5V;
Digital 15 V; 10 kOhm impedance;
LOW = TOP switch off;
HIGH = TOP switch on
Digital 15 V; 10 kOhm impedance;
LOW = BOT switch off;
HIGH = BOT switch on
Stabilised +15V ±4%
Stabilised +15V ±4%
© by SEMIKRON