SKYPER32PROR_0701 Datasheet, PDF (17/18 Pages) Semikron International – IGBT Driver Core

SKYPER™ 32PRO R
The connection between driver core and printed circuit board should be mechanical reinforced by using support posts.
Use of Support Posts
Product information of suitable support posts and
distributor contact information is available at e.g.
http://www.richco-inc.com (e.g. series DLMSPM,
LCBST).
Please note:
The use of agressive materials in cleaning process of driver core may be detrimental for the device parameters.
Environmental Conditions
The driver core is type tested under the environmental conditions below.
Conditions
Vibration
Shock
Values (max.)
Sinusoidal sweep 20Hz … 500Hz, 5g, 26 sweeps per axis (x, y, z)
- Tested acc. IEC 68-2-6
- Connection between driver core and printed circuit board mechanical reinforced by using support posts.
Half-sinusoidal pulse, 5g, shock width 18ms, 3 shocks in each direction (±x, ±y, ±z), 18 shocks in total
- Tested acc. IEC 68-2-27
- Connection between driver core and printed circuit board mechanical reinforced by using support posts.
The characteristics and further environmental conditions are indicated in the data sheet.
17
2007-01-19 – Rev03
© by SEMIKRON