DS17H732S Datasheet, PDF (5/20 Pages) Sanyo Semicon Device – 3-PHASE STEPPING SYSTEMS

Combination list of 3-phase driver
System type
Motor flange size Basic step angle
˘ _{42 mm}
1.2˃
ʢ^˘ 1.65 inchʣ _1.2˃
Standard model
˘ _{50 mm}
1.2˃
ʢ^˘ 1.97 inchʣ _1.2˃
˘ _{56 mm}
1.2˃
ʢ^˘ 2.20 inchʣ _1.2˃
˘ _{60 mm}
1.2˃
ʢ^˘ 2.36 inchʣ _1.2˃
Set part number
Single shaft
Double shaft
DS17H532S
DS17H532D
DS17H533S
DS17H533D
DS17H632S
DS17H632D
DS17H633S
DS17H633D
DS17H732S
DS17H732D
DS17H733S
DS17H733D
DS17H782S
DS17H782D
DS17H783S
DS17H783D
Motor model number
Single shaft
Double shaft
Rated current
103H5332-0340 103H5332-0310 3 A
103H5333-0340 103H5333-0310 3 A
103H6332-0340 103H6332-0310 3 A
103H6333-0340 103H6333-0310 3 A
103H7332-0340 103H7332-0310 3 A
103H7333-0340 103H7333-0310 3 A
103H7832-0340 103H7832-0310 3 A
103H7833-0340 103H7833-0310 3 A
Specifications of driver
Model number
Input source
Main
power
Control power
PMDSA1S3P01
DC24 V ʶ 10 ˋ
ʵ
Source current
3 A MAX.
Operating ambient temperature 0 to +50˃C
Conservation temperature
-20 to +70˃C
Operating ambient humidity
Basic
specifications
Environment
Conservation humidity
Vibration resistance
Impact resistance
35 to 85 ˋ RHʢno condensationʣ
10 to 90 ˋ RHʢno condensationʣ
0.5G Tested under the following conditions, frequency range : 10 to 55 Hz, direction : along the X, Y,
and Z axes, for 2 hours
Considering the NDS-C-0110 standard section 3.2.2 division lCz , not influenced
Withstand voltage
Not influenced when AC500 V is applied between power input terminal and cabinet for one minute
Insulation resistance
10M Њ when measured with DC500 V megohmmeter between
MassʢWeightʣ
0.14 kgʢ0.31 lbsʣ
Applied Standards
UL Standards
File No.
UL508C
E179775
Functions
Selection function
I/O
signals
Command pulse input signal
Power down input signal
Rotation monitor output signal
Auto current down, step angle, pulse input methodʢoptionalʣ
Photo coupler input method, input resistance 330 Њ
Input signal voltage : H = 4.0 to 5.5 V
ɹɹɹɹɹɹɹɹɹɹɹ L = 0 to 0.5 V
Maximum input frequency : 50kpulse/s
Photo coupler input method, input resistance 330 Њ
Input signal voltage : H = 4.0 to 5.5 V
ɹɹɹɹ L = 0 to 0.5 V
Open collector output by photo coupler
Output signal standard, Vceo = 30 V MAX., Ic = 5 mA MAX.
4