DS17H732S Datasheet, PDF (14/20 Pages) Sanyo Semicon Device – 3-PHASE STEPPING SYSTEMS

3-phase STEPPING SYSTEMS
Stepping motor Specifications
General specifications
103H533 ˘
103H633 ˘
103H733 ˘
103H783 ˘
Insulation class
B speciesʢ130˃ʣ
Insulation resistance
Withstand voltage
Operating environment
Not less then 100M Њ between winding and frame by DC500 V megger at normal temperature and hamidity.
Without abnormality when applying 50/60 Hz, 1000 V ACʢ500 V AC for103H533˘ʣ
for 1 minuteʢleakage current 1 mAʣbetween winding and frame at normal temperature and humidity.
Ambient temperature : -10 to +50˃C
Ambient humidity : 20 to 90%ʢno condensationʣ
Winding temperature rise
80 K MAX.Ê¢Based on Sanyo Denki standard.Ê£
Standing angle error
ʶ 0.06˃
Axial play
Radial playʢNote 1ʣ
0.075 mmʢ0.003 inchʣMAX.
Load : 9Nʢ2lbsʣ
0.025 mmʢ0.001 inchʣMAX.
Load : 4.4Nʢ1lbsʣ
Shaft runout
Concentricity of mounting spigot relative
to shaft
Ї 0.05 mmʢ0.002 inchʣ
Perpendicularity
relative to shaft
of
mounting
surface
0.1 mmʢ0.004 inchʣ
Ê¢Note1Ê£When load is applied at 1/3 length from output shaft edge.
ʶ 0.06˃
ʶ 0.06˃
0.075 mmʢ0.003 inchʣMAX.
Load : 9Nʢ2lbsʣ
0.025 mmʢ0.001 inchʣMAX.
Load : 4.4Nʢ1lbsʣ
0.075 mmʢ0.003 inchʣMAX.
Load : 9Nʢ2lbsʣ
0.025 mmʢ0.001 inchʣMAX.
Load : 4.4Nʢ1lbsʣ
0.025 mmʢ0.001 inchʣ
Ї 0.075 mmʢ0.003 inchʣ
Ї 0.075 mmʢ0.003 inchʣ
0.1 mmʢ0.004 inchʣ
0.075 mmʢ0.003 inchʣ
ʶ 0.06˃
0.075 mmʢ0.003 inchʣMAX.
Load : 9Nʢ2lbsʣ
0.025 mmʢ0.001 inchʣMAX.
Load : 4.4Nʢ1lbsʣ
Ї 0.075 mmʢ0.003 inchʣ
0.075 mmʢ0.003 inchʣ
Internal connection and rotational direction
˙ Internal connection
ʢ ʣConnector pin number
˙ Direction of motor rotate
When DC-energized in the order below, the rotational direction must be
counterclockwise viewed from the output axis side.
Type
1
2
Energization 3
order
4
5
6
Connector type pin number
Ê¢1Ê£
Ê¢2Ê£
Ê¢3Ê£
Ê´
ʵ
Ê´
ʵ
Ê´
ʵ
ʵ
Ê´
ʵ
Ê´
ʵ
Ê´
Allowable radial load / thrust load
Radial load
Thrust load
Frange size
˘ _{42 mmʢ}˘ _{1.65 inchʣ}
˘ _{50 mmʢ}˘ _{1.97 inchʣ}
˘ _{56 mmʢ}˘ _{2.2 inchʣ}
˘ _{60 mmʢ}˘ _{2.36 inchʣ}
Model number
103H53 ˘˘
103H63 ˘˘
103H73 ˘˘
103H783 ˘
Distance from end of shaft : mmʢinchʣ
0Ê¢0Ê£
5Ê¢0.2Ê£
10Ê¢2.25Ê£
Radial load : Nʢlbsʣ
24Ê¢5Ê£
30Ê¢6Ê£
38Ê¢8Ê£
71Ê¢15Ê£
87Ê¢19Ê£
115Ê¢25Ê£
52Ê¢11Ê£
65Ê¢14Ê£
85Ê¢19Ê£
70Ê¢15Ê£
87Ê¢19Ê£
114Ê¢25Ê£
15Ê¢3.38Ê£
53Ê¢11Ê£
167Ê¢37Ê£
123Ê¢27Ê£
165Ê¢37Ê£
Thrust load : Nʢlbsʣ
10Ê¢2.25Ê£
15Ê¢3.37Ê£
15Ê¢3.37Ê£
20Ê¢4.50Ê£
13