LV4147W Datasheet, PDF (1/26 Pages) Sanyo Semicon Device – Bi-CMOS LSI For LCD Panel Drive Single Chip IC

Ordering number : EN8928A
LV4147W
Bi-CMOS LSI
For LCD Panel Drive
Single Chip IC
Overview
The LV4147W is single chip IC for LCD panel drive.
Functions
• Analog block RGB Decoder/Driver
• Digital block Timing Generator
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Maximum supply voltage
Allowable power dissipation
VCC1 max
VCC2 max
VDD max
Pd max
Analog LOW type
Analog HIGH type
Digital type
Ta ≤ 75°C * Mounted on a board.
Operating temperature
Topr
Storage temperature
Tstg
Input pin voltage
VINA
VIND
VIND
Analog input pin
Digital input pin (Except pin 10, 11 and 12)
Digital input pin (10, 11, 12pin)
* : Mounted on a board : 30×30×1.6mm³, glass epoxy board
Ratings
Unit
6
V
12
V
4.5
V
350
mW
-15 to +75
°C
-40 to +125
°C
-0.3 to VCC1
V
-0.3 to VDD+0.3
V
-0.3 to +4.5
V
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
50907 TI PC B8-6537 No.8928-1/26