LC8904Q Datasheet, PDF (1/20 Pages) Sanyo Semicon Device – Digital Audio Interface Receiver

Ordering number : EN*5014B
CMOS LSI
LC8904Q
Digital Audio Interface Receiver
Preliminary
Overview
The LC8904Q demodulates data transmitted between
digital audio equipment in the EIAJ format (CP-1201) to a
normal format signal synchronized with the receiving side
input signal.
Features
• Synchronizes with the transmitted EIAJ format signal
using a built-in PLL circuit.
• Modes are set up and codes are output according to
commands sent over a microprocessor interface.
— Input pin and output data format setup
— Selection of digital source mode or analog source
mode
— 32-bit channel status output (consumer product
mode 0)
— 80-bit subcode Q data output (CRC check included)
• Either a 384fs or a 512fs clock can be selected as the
system clock.
• Provides 256fs, 128fs, BCLK, and LRCK clock outputs.
• Implements a CD subcode interface (CP-2401) using
user bits.
• Fabricated in a CMOS single-voltage power supply
process
• Package: QFP-48E
Package Dimensions
unit: mm
3156-QFP48E
[LC8904Q]
SANYO: QIP48E
• CCB is a trademark of SANYO ELECTRIC CO., LTD.
• CCB is SANYO’s original bus format and all the bus
addresses are controlled by SANYO.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-0005 JAPAN
73096HA (OT) No. 5014-1/20