BU97530KVT Datasheet, PDF (56/59 Pages) Rohm – Built-in OSC circuit

BU97530KVT
Datasheet
Version / Revision History
Version
date
description
001 21. Apr. 2014 New Release
Page.8-15 Modify 3-SPI Data Transfer Format Wn0 delete(fix to 0)
002
21. Oct. 2014
Page.40,41,47,48 Delete COM4 description
Page.51 Delete Wn0 description in RESET CONDITION Table
Page.54 Modify Ordering Information
Page.4 Add External Clock Duty.
Page.5 Modify Data Setup Time Min limit.
Page.5 Modify Data Hold Time Min limit.
Page.5 Modify SCE Wait Time Min limit.
Page.5 Modify SCE Setup Time Min limit.
Page.5 Modify SCE Hold Time Min limit.
Page.5 Modify High-level Clock Pulse Width Min limit.
Page.5 Modify Low-level Clock Pulse Width (Write) Min limit.
003
2. Mar. 2015
Page.5
Page.5
Add Clock Cycle Time.
Add Low-Level Clock Pulse Width (Read).
Page.5 Add RPU and CL explanation.
Page.5 Add SDO signal, tccyc and tclwr on Figure5 Serial Interface Timing.
Page.5 Modify tclww from tclw on Figure5 Serial Interface Timing.
Page.5 Modify reference level of tchw to VIH1,VIH2 from 50% on Figure5 Serial Interface Timing.
Page.5 Modify reference level of tclww to VIL1 from 50% on Figure5 Serial Interface Timing.
Page.5 Delete tcp on Figure5 Serial Interface Timing (1.When SCL is stopped at the low level) .
Page.5 Delete tcs on Figure5 Serial Interface Timing (2.When SCL is stopped at the high level).
Page.54,55 Add packing specification for tray.
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
56/56
TSZ02201-0P4P0D300570-1-2
02.Mar.2015 Rev.003