|
BU97530KVT Datasheet, PDF (1/59 Pages) Rohm – Built-in OSC circuit | |||
|
LCD Segment Drivers
Multi-function LCD Segment Drivers
BU97530KVT
MAX 445 Segment(89segx5COM)
General Description
The BU97530KVT is 1/5, 1/4, 1/3 or 1/1 duty
general-purpose LCD driver that can be used for
frequency display in electronic tuners under the
control of a microcontroller. The BU97530KVT can
drive up to 445 LCD Segments directly. The
BU97530KVT can also control up to 9
general-purpose output ports.
These products also incorporate a key scan circuit
that accepts input from up to 30 keys to reduce
printed circuit board wring.
Features
 Key input function for up to 30 keys (A key scan is
performed only when a key is pressed.)
 Either 1/5, 1/4, 1/3 or 1/1 duty (static) can be
selected with the serial control data.
1/5 duty drive: Up to 445 segments can be driven
1/4 duty drive: Up to 360 segments can be driven
1/3 duty drive: Up to 270 segments can be driven
1/1 duty drive: Up to 90 segments can be driven
 Serial data control of frame frequency for common
and segment output waveforms.
 Serial data control of switching between the
segment output port , PWM output port and
general-purpose output port functions.(Max 9
ports)
 Built-in OSC circuit
 Integrated Power-on Reset circuit
 No external component
 Low power consumption design
 Supports Line and Frame Inversion
Key Specifications
 Supply Voltage Range:
+2.7V to +6.0V
 Operating Temperature Range:
-40°C to +85°C
 Max Segments:
445 Segments
 Display Duty:
1/1,1/3,1/4,1/5 selectable
 Bias:
1/2, 1/3 selectable
 Interface:
3wire serial interface
Packages
TQFP100V
W(Typ.)ÃD(Typ.)ÃH(Max.)
TQFP100V
16.00mm x 16.00mm x 1.20mm
Applications
 Car audio, Home electrical appliance,
Meter equipment etc.
Typical Application Circuit
Key Matrix
+5V
(Note1)
From
Control
To Control
KS1/S79
|
KS6/S84
VDD
KI1/S85
|
COM1
KI5/S89 COM2
COM3
COM4
COM5/S78
S1/P1/G1
SCE
SCL
SDI
SDO
S9/P9/G9
S10
S77
OSC/S90
(P1/G1) (General purpose/PWM ports)
(P9/G9) (For use control of backlight)
LCD Panel
(Up to 445
Segments)
(Note1) Insert capacitors between VDD and VSS Câ¥0.1uF
Figure 1. Typical Application Circuit
âProduct structureï¼Silicon monolithic integrated circuit âThis product is not designed protection against radioactive rays
.www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
TSZ22111ã»14ã»001
1/56
TSZ02201-0P4P0D300570-1-2
02.Mar.2015 Rev.003
|
▷ |