BU94601KV_12 Datasheet, PDF (37/70 Pages) Rohm – AAC/WMA/MP3 +SD Memory Card + iPod

BU94601KV BU94603KV BU94604BKV
Datasheet
SET_VOL
REPRAND
SEL_ID3
SEL_TOC
0x0C -
0x0D -
0x0F -
2
0x53
Setting
value
-
0x00 -
0x01 -
0x02 -
0x03 -
2 0x54 0x04 -
0x05 -
0x06 -
0x07 -
0x00 -
2 0x56
0x01 -
0x00 -
2 0x57
0x01 -
- CLASSIC+BASS BOOST1
- R&B+BASS BOOST1
- BASS BOOST2
· This command sets the sound volume to the 2nd byte value of
-
the command. The setting value ranges 32 steps from 0x00 to
0x1F.
Any value outside of the above range is ignored.
· This command repeats all the tunes within the memory. This is
initially set.
- _{· The last setting to “REPRAND”, “REPEAT” and “RANDOM”}
commands will be enabled.
· The command repeats playing the file within the folder being
-
played.
· The last setting to “REPRAND”, “REPEAT” and “RANDOM”
commands will be enabled.
· This command repeats playing the file being played.
- ^{· The last setting to “REPRAND”, “REPEAT” and “RANDOM”}
commands will be enabled.
· This command plays through the range of ±128 files in the order
-
of the sort from the current one being played at random.
· The last setting to “REPRAND”, “REPEAT” and “RANDOM”
commands will be enabled.
· This command plays all the tunes within the memory. STATUS
RPT_OFF is set as ON.
- · It stops after the last file playing.
· The last setting to “REPRAND”, “REPEAT” and “RANDOM”
commands will be enabled.
· This command plays all the tunes within the folder being played.
STATUS RPT_OFF is set as ON.
- · It stops after the last file playing within the folder.
· The last setting to “REPRAND”, “REPEAT” and “RANDOM”
commands will be enabled.
· This command plays one tunes. STATUS RPT_OFF is set as
ON.
- · It stops after the file playing.
· The last setting to “REPRAND”, “REPEAT” and “RANDOM”
commands will be enabled.
· This command plays through the range of ±128 files in the order
of the sort from the current one being played at random.
-
STATUS RPT_OFF is set as ON.
· It stops after the file playing.
· The last setting to “REPRAND”, “REPEAT” and “RANDOM”
commands will be enabled.
· This command does not perform Tag analysis.
- · The file played immediately after set will be enabled first.
· This command runs Tag analysis.
· The file played immediately after set will be enabled first.
- _{· Upon completion of Tag analysis, the data is written to the status}
register.
-
· This command does not perform TOC analysis.
· TOC analysis is not performed at initial setting.
· When receiving the command, inserting into the device or
changing the device, the master analyzes the total folders
(including root directory) and total supported files within the
device.
· The number of total supported files conforms to SEL_MP3
-
terminal.
· When receiving the command, only change from OFF to ON is
executed.
· Upon completion of TOC analysis, the master returns to the top
tune of the device and stops.
· After TOC analysis, the data is written to the status register.
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
37/66
TSZ02201-0V2V0E600010-1-2
2012.07.12 Rev.001