BU94601KV_12 Datasheet, PDF (34/70 Pages) Rohm – AAC/WMA/MP3 +SD Memory Card + iPod

BU94601KV BU94603KV BU94604BKV
Datasheet
CHNG_DEV
ABORT
SET_
RESUME_
INFO1
SET_
RESUME_
INFO2
SET_
RESUME_
INFO3
SET_
RESUME_
INFO4
SET_
RESUME_
INFO5
SET_
RESUME_
INFO6
SET_
RESUME_
INFO7
SET_
RESUME_
INFO8
FF
FF&PLAY
FFP_ON
FFP_OFF
· The command selects the device between USB memory and SD
memory card. To do this, both devices should be connected or
0x08 -
-
one device should correspond to the other (USB to SD or SD to
USB). Otherwise, this key operation is ignored.
· Stop after selecting the device at the top tune of the device.
· REPEAT and RANDOM settings return to the initial values.
0x0C -
-
· This command interrupts Tag analysis.
· It interrupts Tag analysis only the file is being played.
RESUME · This command sets byte 1 to 6 of 42-byte data obtained by
0x41
INFO
“READ_RESUME_INFO”.
1byte-6byte
RESUME · This command sets byte 7 to 12 of 42-byte data obtained by
0x42
INFO
“READ_RESUME_INFO”.
7byte-12byte
RESUME · This command sets byte 13 to 18 of 42-byte data obtained by
0x43
INFO
“READ_RESUME_INFO”.
13byte-18byte
RESUME · This command sets byte 19 to 24 of 42-byte data obtained by
0x44
INFO
“READ_RESUME_INFO”.
19byte-24byte
RESUME · This command sets byte 25 to 30 of 42-byte data obtained by
0x45
INFO
“READ_RESUME_INFO”.
8 0x51
25byte-30byte
RESUME · This command sets byte 31 to 36 of 42-byte data obtained by
0x46
INFO
“READ_RESUME_INFO”.
31byte-36byte
· This command sets byte 37 to 42 of 42-byte data obtained by
0x47
RESUME
INFO
37byte-42byte
·
“READ_RESUME_INFO”. When RESUME reproduction is
possible, play started that music. When RESUME is impossible,
play the head music of media is started.
About some kind of setting of Resume Play, see Application
Note .
· This command sets byte 37 to 42 of 42-byte data obtained by
0x48
RESUME
INFO
37byte-42byte
·
“READ_RESUME_INFO”. When RESUME reproduction is
possible, it stops in the music. When RESUME is impossible, it
stops at the head of media.
About some kind of setting of Resume Play, see Application
Note.
· When receiving FF command during play, pause or stop, the
master searches the next supported file in the order of sort of the
file being played or paused.
0x00
· During play of the last file, the master returns to the first file in
the order of sort.
· Operation stops upon completion of search.
· When TAG analysis is set by SEL_ID3 command, operation
stops upon completion of TAG analysis.
· When receiving ”FF&PLAY” command during play, pause or
stop, the master searches the next supported file in the order of
sort of the file being played or paused.
4
0x55 0x01
0x01
0x00
· During play of the last file, the master returns to the first file in
the order of sort.
· Operation starts playing, after completion of search.
· When TAG analysis is set by SEL_ID3 command, the master
plays the file upon completion of TAG analysis.
· When receiving FFP_ON command during play, pause or stop,
the master starts fast forward playing from current point.
0x02
· When music finishes into that FFP_ON command is ON, the
master starts fast forward playing from top of the next file. When
setting “REPEAT” or “RANDOM”, master search next file by
setup.
0x03
· When receiving FFP_OFF command during fast forward playing,
the master restarts normal playing from current point.
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
34/66
TSZ02201-0V2V0E600010-1-2
2012.07.12 Rev.001