BU94601KV_12 Datasheet, PDF (36/70 Pages) Rohm – AAC/WMA/MP3 +SD Memory Card + iPod

BU94601KV BU94603KV BU94604BKV
Datasheet
· When receiving “+10” command during play, pause or stop, the
master searches the supported file of the 10^th tune in the order of
sort of the file being played or paused.
+10
0x00
· When the remaining files to be played are less than 10 in the
order of sort, the master returns to the first file.
· The operation stops upon completion of search.
· When TAG analysis is set by SEL_ID3 command, operation
0x05
stops upon completion of TAG analysis.
· When receiving “+10&PLAY” command during play, pause or
stop, the master searches the supported file of the 10^th tune in
the order of sort of the file being played or paused.
+10&PLAY
0x01
· When the remaining files to be played are less than 10 in the
order of sort, the master returns to the first file.
· Operation starts playing, after completion of search.
· When TAG analysis is set by SEL_ID3 command, the master
plays the file upon completion of TAG analysis.
0x00 · When receiving “-10” command during play, pause or stop, the
master searches the supported file of the previous 10^th tune in
the order of sort of the file being played or paused.
-10
0x00
· When playing the top 10 or less files in the order of sort, the
master returns to the first file.
· The operation stops upon completion of search.
· When TAG analysis is set by SEL_ID3 command, operation
stops upon completion of TAG analysis.
0x06
· When receiving “-10&PLAY” command during play, pause or
stop, the master searches the supported file of the previous 10^th
tune in the order of sort of the file being played, paused or
stopped.
-10&PLAY
0x01
· When playing the top 10 or less files in the order of sort, the
master returns to the first file.
· Operation starts playing, after completion of search.
· When TAG analysis is set by SEL_ID3 command, the master
plays the file upon completion of TAG analysis.
*Only BU94601KV/BU94603KV
USB_
MNT_READY
4
0x5D 0x0B
0x01
0x00
· This command prepares for USB memory mount.
· Be sure to send this command when STATUS turns to
USB_INS=H and BUSY=L..
· This command outputs digital audio data as I²S (32fs) format.
0x58 · When SET_DOUT command is sent, SEL_DOUT terminal
setting is ignored
· This command outputs digital audio data as I²S (48fs) format.
0x00 0x59 · When SET_DOUT command is sent, SEL_DOUT terminal
setting is ignored
· This command outputs digital audio data as I²S (64fs) format.
SET_DOUT
4 0x51 0x20
0x5B · When SET_DOUT command is sent, SEL_DOUT terminal
setting is ignored
· This command outputs digital audio data as SPDIF format.
0x01 0x01 · When SET_DOUT command is sent, SEL_DOUT terminal
setting is ignored
· This command stops digital audio output (I²S, SPDIF).
0xFF 0x00 · When SET_DOUT command is sent, SEL_DOUT terminal
setting is ignored
0x00 -
- This command turns OFF the EQ setting.
0x01 -
- POPS
0x02 -
- JAZZ
0x03 -
- ROCK
SET_EQ
0x04 -
- CLASSIC
* See Chapter 2 0x52 0x05 -
- R&B
22.3.
0x07 -
- This command turns OFF the EQ setting.
0x08 -
- BASS BOOST1
0x09 -
- POPS+BASS BOOST1
0x0A -
- JAZZ+BASS BOOST1
0x0B -
- ROCK+BASS BOOST1
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
36/66
TSZ02201-0V2V0E600010-1-2
2012.07.12 Rev.001