English
Language : 

RF5410 Datasheet, PDF (13/33 Pages) RF Micro Devices – LTE MMMB PA Module
Parameter
HB: Band 7
FDD LTE
Frequency
Maximum Linear Output Power
Gain
PA Current
PA Efficiency (PAE)
ACLR- E-UTRA
ACLR1 -UTRA
ACLR2 -UTRA
EVM
Noise Power
Band 7 RX
GPS
ISM Band
RFMD + TriQuint = Qorvo
Specification
Min
Typ
Max
2500
27.5
13.5
0
25.5
2570
27.5
23
18.5
550
120
35
29
-40
-33
-43
-33
-40
-36
-44
-36
-62
-39
-60
-39
2.0
-138
-156
-123
-121
Unit
Condition
MHz
dBm
dBm
dBm
dB
dB
dB
mA
mA
mA
%
dBc
dBc
dBc
dBc
dBc
dBc
%
dBm/Hz
dBm/Hz
dBm/Hz
dBm/Hz
Nominal test conditions unless otherwise stated.
All unused ports terminated in 50Ω.
TA=+25°C; VBATT=3.8V; VCC=3.4V;Mode=HPM.
Modulation: QPSK, 10MHz BW, 12 RB
Band 7
HPM; VCC = 3.4V
LPM; VCC = 1.15V
LPM; VCC = 0.7V
HPM; Pout = 27.5dBm; VCC = 3.4V
LPM; Pout = 13.5dBm; VCC = 1.15V
LPM; Pout = 0dBm; VCC = 0.7V
HPM; Pout = 27.5dBm; VCC = 3.4V
LPM; Pout = 13.5dBm; VCC = 1.15V
LPM; Pout = 0dBm; VCC = 0.7V
HPM; Pout = 27.5dBm; VCC = 3.4V
HPM; Pout = 27.5dBm; VCC = 3.4V
LPM; Pout = 13.5dBm; VCC = 1.15V
HPM; Pout = 27.5dBm; VCC = 3.4V
LPM; Pout = 13.5dBm; VCC = 1.15V
HPM; Pout = 27.5dBm; VCC = 3.4V
LPM; Pout = 13.5dBm; VCC = 1.15V
Pout ≤ Pmax
HPM; Pout = 27.5dBm; VCC = 3.4V
2620MHz to 2690MHz
HPM; Pout = 27.5dBm; VCC = 3.4V
1574MHz to 1577MHz
HPM; Pout = 27.5dBm; VCC = 3.4V
2400MHz to 2452MHz
Modulation: 20MHz,100RB
HPM; Pout = 27.5dBm; VCC = 3.4V
2452MHz to 2484MHz
Modulation: 20MHz,100RB
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS20160809
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
13 of 33