PD178016GC-051_15 Datasheet, PDF (89/96 Pages) Renesas Technology Corp – 8-BIT SINGLE-CHIP MICROCONTROLLER WITH BUILT-IN PRESCALER, PLL FREQUENCY SYNTHESIZER, AND IF COUNTER FOR AUTOMOTIVE FM/MW/LW RADIO APPLICATIONS

µPD178016GC-051
A/D CONVERTER CHARACTERISTICS (TA = -40 to +85 °C, VDD = 4.5 to 5.5 V)
Parameter
Resolution
Total error in conversion
Symbol
Conversion time
Sampling time
Analog input voltage
tCONV
tSAMP
VIAN
Conditions
MIN. TYP. MAX. Unit
8
8
8
bit
±3.0
LSB
22.2
15/fXX
0
44.4
µs
µs
VDD
V
Remarks 1. fXX: System clock frequency (fX/2)
2. fX: System clock oscillator frequency
PLL CHARACTERISTICS (TA = -40 to +85 °C, VDD = 4.5 to 5.5 V)
Parameter
Operating frequency
Symbol
fIN1
fIN2
fIN3
Conditions
VCOL pin in MF mode, with a sinusoidal wave
applied to the VIN pin = 0.1 VP-P
VCOL pin in HF mode, with a sinusoidal wave
applied to the VIN pin = 0.2 VP-P
VCOH pin in VMF mode, with a sinusoidal
wave applied to the VIN pin = 0.15 VP-P
MIN.
0.5
9
60
TYP.
MAX.
3
55
160
Unit
MHz
MHz
MHz
IFC CHARACTERISTICS (TA = -40 to +85 °C, VDD = 4.5 to 5.5 V)
Parameter
Operating frequency
Symbol
fIN4
fIN5
fIN6
Conditions
AMIFC pin in AMIF count mode, with a
sinusoidal wave applied to the VIN pin =
0.1 VP-P^Note
FMIFC pin in FMIF count mode, with a
sinusoidal wave applied to the VIN pin =
0.1 VP-P^Note
FMIFC pin in AMIF count mode, with a
sinusoidal wave applied to the VIN pin =
0.1 VP-P^Note
MIN.
0.4
TYP.
MAX.
0.5
Unit
MHz
10
11
MHz
0.4
0.5
MHz
Note The condition of sinusoidal wave input VIN = 0.1 VP-P is the rated value when the µPD178016GC-051 alone
is operating. Where influence of noise must be taken into consideration, operation under input amplitude
condition of VIN = 0.15 VP-P is recommended.
87