PD178016GC-051_15 Datasheet, PDF (62/96 Pages) Renesas Technology Corp – 8-BIT SINGLE-CHIP MICROCONTROLLER WITH BUILT-IN PRESCALER, PLL FREQUENCY SYNTHESIZER, AND IF COUNTER FOR AUTOMOTIVE FM/MW/LW RADIO APPLICATIONS

µPD178016GC-051
5.3 LCD Panel Displays
Display
ALL
AMS
ASM
AUTO
CH
EON
FM1
FM2
FM3
LW
MW
LOC
LOUD
METAL
MONO
PAUSE
PSCAN
PTY
RANDOM
RDS
REGION
REPEAT
STEREO
TA/DK
TP
TP/SK
Description
This indication appears during disc introduction scan, disc repeat, and disc random operations in CD
changer mode.
Indicates that the system is in auto music search mode.
This indication appears during auto-storage operation in radio mode.
This indication appears in radio mode and auto mode.
This indicator indicates the channel of a preset memory number. The display turns on when a channel
number is displayed in the 14-segment display area.
Indicates that the station currently being received broadcasts traffic information.
The display turns on when a TA signal is detected with other RDS stations received while an RDS station
is being received.
Indicates the radio band being received.
This indication appears in radio mode with LOCAL set.
This indication appears in loudness mode.
The display turns on when METAL tape is inserted in tape mode.
The display turns on when the FM band is received in radio mode and forced MONO mode.
This indication appears during pause in CD changer mode.
This indication appears during preset memory scan operation in radio mode.
This indication appears during PTY search from PTY display while an FM band is being received in radio
mode.
This indication appears in disc random mode and random mode in CD changer mode.
This indication appears in RDS mode when an FM band is being received in radio mode.
This indication appears in REGION mode in radio mode.
This indication appears in repeat mode and disc repeat mode in CD changer mode.
The display turns on when STEREO pin goes low while an FM band is being received in radio mode.
However, always turns off if forced MONO mode is on.
Indicates that the station currently being received is broadcasting traffic information.
The display turns on when the TA signal of an RDS station or the DK signal of a VF station is detected.
Indicates that the station currently being received broadcasts traffic information.
The display turns on when the TP signal of an RDS station or the SK signal of a VF station is detected.
The display turns on when an FM band is being received in TP/SK mode.
Indicates that the station currently being received is an RDS station.
The display turns on when the PI signal of an RDS station is read while an FM band is being received.
Indicates the tape running direction.
60