M16C64C_15 Datasheet, PDF (71/91 Pages) Renesas Technology Corp – RENESAS MCU

M16C/64C Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 3 V
Table 5.39 Electrical Characteristics (2)
R5F3640KCNFA, R5F3640KCNFB, R5F3640KCDFA, R5F3640KCDFB,
R5F3640MCNFA, R5F3640MCNFB, R5F3640MCDFA, R5F3640MCDFB
V_CC1 = V_CC2 = 2.7 to 3.3 V, V_SS = 0 V at T_opr = −20°C to 85°C/−40°C to 85°C, f_(BCLK) = 25 MHz unless otherwise specified.
Symbol
Parameter
Measuring Condition
Standard
Min. Typ. Max.
Unit
I_CC
Power supply current High-speed mode f_(BCLK) = 25 MHz
XIN = 4.2 MHz (square wave), PLL multiplied by 6
20.0
mA
In single-chip, mode,
125 kHz on-chip oscillator stopped
the output pin are
open and other pins
are V_SS
f_(BCLK) = 25 MHz, A/D conversion
XIN = 4.2 MHz (square wave), PLL multiplied by 6
20.7
mA
125 kHz on-chip oscillator stopped
f_(BCLK) = 20 MHz
XIN = 20 MHz (square wave)
16.0
mA
125 kHz on-chip oscillator stopped
125 kHz on-chip Main clock stopped
oscillator mode 125 kHz on-chip oscillator on, no division
450.0
μA
FMR22 = 1 (slow read mode)
Low-power mode f_(BCLK) = 32 MHz
In low-power mode
FMR 22 = FMR23 = 1
160.0
μA
On flash memory ⁽¹⁾
f_(BCLK) = 32 MHz
In low-power mode
40.0
μA
On RAM ⁽¹⁾
Wait mode
Main clock stopped
125 kHz on-chip oscillator on
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 MHz (oscillation capacity High)
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity Low)
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
XIN = 6 MHz
125 kHz on-chip oscillator stopped
Peripheral clock f1 provision disabled except
timers (PCKSTP1A = 1)
Main clock as a timer clock source
(PCKSTP11 = 0, PCKSTP17 = 1)
A given timer operating
20.0
μA
8.0
μA
4.0
μA
0.5
mA
Note:
1.
Stop mode
During flash
memory program
During flash
memory erase
Main clock stopped
125 kHz on-chip oscillator stopped
Peripheral clock stopped
T_opr = 25°C
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 3.0 V
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 3.0 V
This indicates the memory in which the program to be executed exists.
1.6
μA
20.0
mA
30.0
mA
R01DS0016EJ0110 Rev.1.10
Jul 31, 2012
Page 71 of 88