M16C64C_15 Datasheet, PDF (54/91 Pages) Renesas Technology Corp – RENESAS MCU

M16C/64C Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 5 V
Table 5.20 Electrical Characteristics (4)
R5F3640KCNFA, R5F3640KCNFB, R5F3640KCDFA, R5F3640KCDFB,
R5F3640MCNFA, R5F3640MCNFB, R5F3640MCDFA, R5F3640MCDFB
V_CC1 = V_CC2 = 4.2 to 5.5 V, V_SS = 0 V at T_opr = −20°C to 85°C/−40°C to 85°C, f_(BCLK) = 25 MHz unless otherwise specified.
Symbol
Parameter
I_CC
Power supply current High-speed mode
In single-chip, mode,
the output pin are
open and other pins
are V_SS
Measuring Condition
Standard
Min. Typ. Max.
Unit
f_(BCLK) = 25 MHz
XIN = 4.2 MHz (square wave), PLL multiplied by 6
22.0
mA
125 kHz on-chip oscillator stopped
f_(BCLK) = 25 MHz, A/D conversion
XIN = 4.2 MHz (square wave), PLL multiplied by 6
22.7
mA
125 kHz on-chip oscillator stopped
f_(BCLK) = 20 MHz
XIN = 20 MHz (square wave)
17.0
mA
125 kHz on-chip
oscillator mode
125 kHz on-chip oscillator stopped
Main clock stopped
125 kHz on-chip oscillator on, no division
550.0
μA
Low-power mode
FMR22 = 1 (slow read mode)
f_(BCLK) = 32 kHz
In low-power mode
FMR22 = FMR23 = 1
170.0
μA
on flash memory ⁽¹⁾
f_(BCLK) = 32 kHz
In low-power mode
45.0
μA
Wait mode
on RAM ⁽¹⁾
Main clock stopped
125 kHz on-chip oscillator on
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity High)
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity low)
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
XIN = 6 MHz
20.5
μA
11.0
μA
6.0
μA
125 kHz on-chip oscillator stopped
Peripheral clock f1 provision disabled except
timers (PCKSTP1A = 1)
1.2
mA
Main clock as a timer clock source
(PCKSTP11 = 0, PCKSTP17 = 1)
Stop mode
A given timer operating
Main clock stopped
Note:
1.
125 kHz on-chip oscillator stopped
Peripheral clock stopped
T_opr = 25°C
During flash memory f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
program
V_CC1 = 5.0 V
During flash memory f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
erase
V_CC1 = 5.0 V
This indicates the memory in which the program to be executed exists.
1.7
μA
20.0
mA
30.0
mA
R01DS0016EJ0110 Rev.1.10
Jul 31, 2012
Page 54 of 88