M16C64C_15 Datasheet, PDF (52/91 Pages) Renesas Technology Corp – RENESAS MCU

M16C/64C Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 5 V
Table 5.18 Electrical Characteristics (2) ⁽¹⁾
V_CC1 = V_CC2 = 4.2 to 5.5 V, V_SS = 0 V at T_opr = −20°C to 85°C/−40°C to 85°C, f_(BCLK) = 25 MHz unless otherwise specified.
Symbol
V_T+ - V_T- Hysteresis
V_T+ - V_T- Hysteresis
I_IH
High input
current
Parameter
HOLD, RDY, TA0IN to TA4IN, TB0IN to TB5IN,
INT0 to INT7, NMI, ADTRG, CTS0 to CTS2,
CTS5 to CTS7, SCL0 to SCL2, SCL5 to SCL7,
SDA0 to SDA2, SDA5 to SDA7, CLK0 to CLK7,
TA0OUT to TA4OUT,
KI0 to KI3, RXD0 to RXD2, RXD5 to RXD7,
SIN3, SIN4, SD, PMC0, PMC1, SCLMM,
SDAMM, CEC, ZP, IDU, IDV, IDW
RESET
Measuring
Condition
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
P9_0 to P9_7, P10_0 to P10_7
XIN, RESET, CNVSS, BYTE
V_I = 5 V
Standard
Unit
Min. Typ. Max.
0.5
2.0 V
0.5
2.5 V
5.0 μA
I_IL
Low input P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, V_I = 0 V
current
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
P9_0 to P9_7, P10_0 to P10_7
XIN, RESET, CNVSS, BYTE
−5.0 μA
R_PULLUP Pull-up
resistance
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4,
P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7
V_I = 0 V
30
50 100 kΩ
R_fXIN
R_fXCIN
V_RAM
Feedback resistance XIN
Feedback resistance XCIN
RAM retention voltage
1.5
MΩ
8
MΩ
In stop mode
1.8
V
Note:
1. When V_CC1 ≠ V_CC2, refer to 5 V or 3 V standard depending on the voltage.
R01DS0016EJ0110 Rev.1.10
Jul 31, 2012
Page 52 of 88