M16C64C_15 Datasheet, PDF (53/91 Pages) Renesas Technology Corp – RENESAS MCU

M16C/64C Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 5 V
Table 5.19 Electrical Characteristics (3)
R5F36406CNFA, R5F36406CNFB, R5F36406CDFA, R5F36406CDFB,
R5F3640ECNFA, R5F3640ECNFB, R5F3640ECDFA, R5F3640ECDFB
V_CC1 = V_CC2 = 4.2 to 5.5 V, V_SS = 0 V at T_opr = −20°C to 85°C/−40°C to 85°C, f_(BCLK) = 25 MHz unless otherwise specified.
Symbol
Parameter
Measuring Condition
Standard
Min. Typ. Max.
Unit
I_CC
Power supply current High-speed mode f_(BCLK) = 25 MHz
XIN = 4.2 MHz (square wave), PLL multiplied by 6
20.0
mA
In single-chip, mode,
125 kHz on-chip oscillator stopped
the output pin are
open and other pins
f_(BCLK) =25 MHz, A/D conversion
XIN = 4.2 MHz (square wave), PLL multiplied by 6
20.7
mA
are V_SS
125 kHz on-chip oscillator stopped
f_(BCLK) = 20 MHz
XIN = 20 MHz (square wave)
16.0
mA
125 kHz on-chip oscillator stopped
125 kHz on-chip Main clock stopped
oscillator mode 125 kHz on-chip oscillator on, no division
500.0
μA
FMR22 = 1 (slow read mode)
Low-power mode f_(BCLK) = 32 kHz
In low-power mode
FMR22 = FMR23 = 1
160.0
μA
On flash memory ⁽¹⁾
f_(BCLK) = 32 kHz
In low-power mode
45.0
μA
On RAM ⁽¹⁾
Wait mode
Main clock stopped
125 kHz on-chip oscillator on
Peripheral clock operating
20.0
μA
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity High)
125 kHz on-chip oscillator stopped
Peripheral clock operating
11.0
μA
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity Low)
125 kHz on-chip oscillator stopped
Peripheral clock operating
6.0
μA
T_opr = 25°C
XIN = 6 MHz
125 kHz on-chip oscillator stopped
Peripheral clock f1 provision disabled except
timers (PCKSTP1A = 1)
1.2
mA
Main clock as a timer clock source
(PCKSTP11 = 0, PCKSTP17 = 1)
A given timer operating
Stop mode
Main clock stopped
125 kHz on-chip oscillator stopped
Peripheral clock stopped
1.7
μA
During flash
memory program
T_opr = 25°C
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 5.0 V
20.0
mA
During flash
memory erase
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 5.0 V
30.0
mA
Note:
1. This indicates the memory in which the program to be executed exists.
R01DS0016EJ0110 Rev.1.10
Jul 31, 2012
Page 53 of 88