M16C64A_15 Datasheet, PDF (71/92 Pages) Renesas Technology Corp – RENESAS MCU

M16C/64A Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 3 V
Table 5.39 Electrical Characteristics (2)
R5F364A6NFA, R5F364A6NFB, R5F364A6DFA, R5F364A6DFB,
R5F364AENFA, R5F364AENFB, R5F364AEDFA, R5F364AEDFB
V_CC1 = V_CC2 = 2.7 to 3.3 V, V_SS = 0 V at T_opr = −20°C to 85°C/−40°C to 85°C, f_(BCLK) = 25 MHz unless otherwise specified.
Symbol
Parameter
Measuring Condition
Standard
Min. Typ. Max.
Unit
I_CC
Power supply current High-speed mode f_(BCLK) = 25 MHz
XIN = 4.2 MHz (square wave), PLL multiplied by 6
20.0
mA
In single-chip, mode,
125 kHz on-chip oscillator stopped
the output pin are
open and other pins
are V_SS
f_(BCLK) = 25 MHz, A/D conversion
XIN = 4.2 MHz (square wave), PLL multiplied by 6
20.7
mA
125 kHz on-chip oscillator stopped
f_(BCLK) = 20 MHz
XIN = 20 MHz (square wave)
16.0
mA
125 kHz on-chip
oscillator mode
Low-power mode
125 kHz on-chip oscillator stopped
Main clock stopped
125 kHz on-chip oscillator on, no division
FMR22 = 1 (slow read mode)
f_(BCLK) = 32 MHz
In low-power mode
FMR 22 = FMR23 = 1
450.0
μA
160.0
μA
On flash memory ⁽¹⁾
Note:
1.
Wait mode
Stop mode
During flash
memory program
During flash
memory erase
f_(BCLK) = 32 MHz
In low-power mode
On RAM ⁽¹⁾
Main clock stopped
125 kHz on-chip oscillator on
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 MHz (oscillation capacity High)
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity Low)
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
Main clock stopped
125 kHz on-chip oscillator stopped
Peripheral clock stopped
T_opr = 25°C
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 3.0 V
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 3.0 V
This indicates the memory in which the program to be executed exists.
40.0
μA
20.0
μA
8.0
μA
4.0
μA
1.6
μA
20.0
mA
30.0
mA
R01DS0032EJ0200 Rev.2.00
Feb 07, 2011
Page 71 of 88