|
M16C64A_15 Datasheet, PDF (3/92 Pages) Renesas Technology Corp – RENESAS MCU | |||
|
◁ |
M16C/64A Group
1. Overview
Table 1.2 Specifications for the 100-Pin Package (2/2)
Item
Function
Description
Timer A
16-bit timer à 5
Timer mode, event counter mode, one-shot timer mode, pulse width
modulation (PWM) mode
Event counter two-phase pulse signal processing (two-phase encoder
input) Ã 3
Programmable output mode à 3
Timer B
16-bit timer à 6
Timer mode, event counter mode, pulse period measurement mode,
pulse width measurement mode
Timers
Three-phase motor control
timer functions
⢠Three-phase inverter control (timer A1, timer A2, timer A4, timer B2)
⢠On-chip dead time timer
Real-time clock
Count: seconds, minutes, hours, days of the week
PWM function
8 bits à 2
Remote control signal receiver
⢠2 circuits
⢠4 wave pattern matchings (differentiate wave pattern for headers, data
0, data 1, and special data)
⢠6-byte receive buffer (1 circuit only)
⢠Operating frequency of 32 kHz
Serial
Interface
UART0 to UART2, UART5 to
UART7
Clock synchronous/asynchronous à 6 channels
I2C-bus, IEBus, special mode 2
SIM (UART2)
SI/O3, SI/O4
Clock synchronization only à 2 channels
Multi-master I2C-bus Interface
1 channel
CEC Functions (2)
CEC transmit/receive, arbitration lost detection, ACK automatic output,
operation frequency of 32 kHz
A/D Converter
10-bit resolution à 26 channels, including sample and hold function
Conversion time: 1.72 µs
D/A Converter
8-bit resolution à 2 circuits
CRC Calculator
CRC-CCITT (X16 + X12 + X5 + 1),
CRC-16 (X16 + X15 + X2 + 1) compliant
Flash Memory
⢠Program and erase power supply voltage: 2.7 to 5.5 V
⢠Program and erase cycles: 1,000 times (program ROM 1, program
ROM 2), 10,000 times (data flash)
⢠Program security: ROM code protect, ID code check
Debug Functions
On-chip debug, on-board flash rewrite, address match interrupt à 4
Operation Frequency/Supply Voltage
25 MHz/VCC1 = 2.7 to 5.5 V, VCC2 = 2.7 V to VCC1
Current Consumption
Described in Electrical Characteristics
Operating Temperature
-20°C to 85°C, -40°C to 85°C (1)
Package
100-pin QFP: PRQP0100JD-B (Previous package code: 100P6F-A)
100-pin LQFP: PLQP0100KB-A (Previous package code: 100P6Q-A)
Notes:
1. See Table 1.3 âProduct Listâ for the operating temperature.
2. The CEC function indicates circuitry which supports the transmission and reception of CEC signals standardized
by the High-Definition Multimedia Interface (HDMI). HDMI and High-Definition Multimedia Interface are
registered trademarks of HDMI Licensing, LLC.
R01DS0032EJ0200 Rev.2.00
Feb 07, 2011
Page 3 of 88
|
▷ |