M32C83 Datasheet, PDF (514/527 Pages) Renesas Technology Corp – 16/32-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M32C/80 SERIES

REVISION HISTORY
M32C/83 GROUP (M32C/83, M32C/83T) Hardware Manual
Rev. Date
Page
207
216
226
296
304
315
317
320
324
334
364
385
388
390
391
393
394
398
400
429
Description
Summary
• Modify PD7_2=0 to PD7_0=0 on ‘PD7 register’ column and ‘SRxD2 input’ row in
Table 1.20.11.
• Modify PD7_0=0 to PD7_2=0 on ‘PD7 register’ column and ‘CLK2 input’ row in
Table 1.20.11.
• Modify PS3_4=0 to PS3_5=0 on ‘PS3 register’ column and ‘CLK4 input’ row in
Table 1.20.23.
CAN Module
• Modify PSL2_2=0 to PSL2_1=0 on ‘PSL1 and PSL2 registers’ column and ‘P82’
row in Table 1.21.2.
Intelligent I/O
• Modify Setting value of the GiPO0 register to Setting value of the GiPOk register
as n and m on the second figure in Figure 1.22.26.
• Modify RxD to ISRxD on ‘IPOL’ row and TxD to ISTxD on ‘OPOL’ row in Figure
1.22.33.
• Modify IPS=1 to IPS1=1 on IPS registers column and ‘P112’ row in Table
1.22.26.
• Modify TCRCRC to TCRCE on ‘CRC’ row in Table 1.22.28.
• Delete SIOiTR and SIOiRR and add SRTiR in note 3 in Table 1.22.28.
• Modify IER to OER in note 1 in the second figure of Figure 1.22.42.
• Modify SIOiTR to SIO2TR and SIO5RR to SIO2RR in Table 1.22.30 and 1.22.36.
• Modify GiCR to G3CR in Table 1.22.41.
DRAMC
• Modify SRDF to SREF in note 3 in Figure 1.27.1.
• Modify IOUTC10 to OUTC10 on ‘PSC_3’ row in Figure 1.28.14.
• Modify P0 to P5 to P1 in note 1 in Table 1.28.17.
Programable I/O Port
• Modify INPC1 to INPC11 on ‘PS1 register’ column and ‘Bit 4’ row in Table 1.28.4.
• Modify INPC0 to INPC02 on ‘PS2 register’ column and ‘Bit 0’ row in table 1.28.5.
• Modify ISCLK input to ISCLK0 input on ‘Bit 1’ row in table 1.28.12.
Usage Precaution
_________
• Modify PM0 to PM00 in “HOLD Signal”
• Modify all SP to ISP in (1) SP Setting of “Interrupts”.
• Modify all TAi to TBi in 1. Timer Mode and Event Counter Mode of “Timer B”.
• Modify the CAN module to the microcomputer in “Resetting CNVSS Pin with H”.
• Delete a discription of ‘Difference between Flash Memory version and Masked
ROM’
Electric Charactistics
• Modify IOH=5mA to IOL=5mA on ‘VOL’ row and ‘Mesurement Condition’ column
in Table 1.31.3.
C-3