M32C83 Datasheet, PDF (513/527 Pages) Renesas Technology Corp – 16/32-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M32C/80 SERIES

REVISION HISTORY
M32C/83 GROUP (M32C/83, M32C/83T) Hardware Manual
Rev. Date
1.02 2003-1
Page
338
355
394
2-3
3
33
78
78
80
117
141
186
192
206
Description
Summary
A/D Convertor
• Modify the figure “A/D Convertor Block Diagram”.
• Add the table ‘pin settings’.
D/A Convertor
• Add the table ‘pin settings’.
Usage Precaution
• Add descriptions about the ‘PLL synthesizer’.
• Add descriptions about the ‘Timer A’ and ‘Timer B’.
• Add descriptions about the ‘Low-Voltage Operation’.
Overview
• Add -40 to 85°C to ‘Operating ambient temperature’ row in Table 1.1.1 and 1.1.2.
• Delete 8-bit or 16-bit clock synchronous serial I/O:1 channel (group3) on
‘Peripheral function’ row in Table 1.1.2.
SFR
• Modify 00?0 X0002 to 0000 X0002 on ‘value after RESET’ column on ‘017B16’
row.
System Clock
• Modify 0 to 1 on ‘PLC00’ column and ‘10MHz’ row in Table 1.8.2.
• Modify the PLC02 to PLC0 bits and the PLC05 to PLC04 bits to the PLC0 register
in the third step in Figure 1.8.13.
• Modify 1 to 0 on ‘CM00’ column and ‘BCLK output’ row in Table 1.8.5.
DMAC
• Add the note 3 in Figure 1.11.2.
Timer
• Modify TA4 and TA1 to TA0 and TA2 on the TA1TGL and TA1TGH in the top
figure of Table 1.14.5.
• Modify TA4 and TA1 to TA1 and TA3 on the TA2TGL and TA2TGH in the top
figure of Table 1.14.5.
• Modify TA4 and TA1 to TA2 and TA4 on the TA3TGL and TA3TGH in the top
figure of Table 1.14.5.
• Modify TA4 and TA1 to TA3 and TA0 on the TA4TGL and TA4TGH in the top
figure of Table 1.14.5.
Serial I/O
• Modify PD7_0=0 to PD7_2=0 on ‘PD7 register’ column and ‘CLK2 input’ row in
Table 1.18.4.
• Modify PD7_0=0 to PD7_2=0 on ‘PD7 register’ column and ‘CLK2 input’ row in
Table 1.19.4.
• Modify a function description on ‘UiRRM’ row in Table 1.20.9.
C-2